64 Channel Network Video Recorder

Place of Origin: China
Brand Name: KAIDUN
Model Number: KD-NVR64
Inquiry Now
Get a Quote
Specifications
Highlight Features

64 Channel Network Video Recorder

,

HDMI VGA Network Video Recorder

,

ONVIF Marine Network Video Recorder

IP Camera Input:
Max 64‑channel IP Camera Access
Decoding Capacity:
Multi‑stream Adaptive Decoding For 4MP / 8MP High‑resolution Streams
Local Video Output:
HDMI,VGA
Power Supply:
100~240V AC Power Consumption:≤50W(without HDD)
Incoming Bandwidth:
384Mbps
Network Interface:
2 RJ-4510M/100M/1000M Self-adaptive Ethernet Interface
Product Description

KD‑NVR64

64‑Channel Marine‑Grade Network Video Recorder

KD‑NVR64 is DNV type‑approved marine‑grade 64‑channel network video recorder, designed for vessel and offshore‑platform surveillance system deployments. Compliant with IEC 60945 marine environmental and EMC standards. Supports up to 64‑channel IP camera input, multi‑stream decoding, hot‑swap hard‑disk bays for mass‑storage. Equipped with multiple network ports, HDMI/VGA local‑monitor outputs. Supports ONVIF protocol, RAID storage modes, alarm‑input & alarm‑output interfaces. Wide‑range AC / DC dual power‑supply options. Optimised for wheelhouse, on‑board equipment‑rooms and offshore‑platform control‑rooms, working cooperatively with full series of KAIDUNTECH marine surveillance cameras to realise complete ship‑borne video recording & management solution.


🎯 Customer Pain Points 

Surveillance system construction for ocean‑going vessels and offshore‑platforms faces these core challenges:

  1. Mandatory marine certification for ship‑board recording equipment Network video recorders installed for official marine surveillance projects must obtain valid DNV type‑approval and satisfy IEC 60945 marine EMC & environmental requirements, to pass ship‑class‑survey, offshore‑EPC acceptance and periodic maritime safety audits. Non‑certified NVR cannot be accepted during vessel inspection.
  2. High‑channel‑count recording for large‑scale marine surveillance systems Large tankers, container ships and FPSOs deploy dozens of marine / explosion‑proof IP cameras covering decks, process areas and super‑structure zones. Require high‑density 64‑channel video reception and decoding to unify management of multi‑point camera devices.
  3. Reliable mass‑storage against marine equipment‑room risks Ship‑board and offshore equipment‑rooms suffer vibration, power fluctuation and occasional hard‑disk failure. Ordinary storage devices risk footage loss. Hot‑swap hard‑disk trays and RAID redundancy are required to improve data safety for evidence‑critical maritime video archives.
  4. Dual‑power‑supply adapting marine vessel power architecture Marine control cabinets adopt mixed AC mains and DC power distribution. NVR shall support dual‑power‑input to avoid single‑power‑point‑failure risk for surveillance recording systems.
  5. Rich local output & multi‑network‑port design for marine cabinet layout Maritime control‑rooms need local HDMI / VGA display output to connect marine monitors. Multiple independent network ports separate camera data network and management network, avoiding network congestion inside ship‑board cabinet systems.
  6. Good anti‑interference performance under complex marine EMC environment Ship‑board radar, radio‑communication and navigation equipment generate heavy electromagnetic interference. NVR must pass marine‑grade EMC tests to guarantee stable recording without picture distortion or signal drop‑out.
  7. Open‑protocol compatibility with mixed marine camera ecosystem Marine projects often mix marine‑grade dome, PTZ, fixed and explosion‑proof cameras from the same or different vendors. ONVIF compliance ensures seamless access and unified management of various IP surveillance devices.

KD‑NVR64 addresses all above‑mentioned pain‑points: DNV‑approved 64‑channel marine‑grade network video recorder, compliant with IEC 60945 marine standards. 64‑channel IP video input, hot‑swap RAID‑supported mass‑storage, multi‑network‑port design, HDMI/VGA local display, dual‑power‑supply and ONVIF compatibility. Purpose‑built for video recording and device management for large‑scale surveillance systems onboard merchant vessels, tankers and FPSOs.


🏭 Typical Application Scenarios 

✅ Ocean‑Going Merchant Vessels: Container ships, crude‑oil tankers, bulk carriers ‑ Equipment‑room / wheelhouse cabinet‑mount deployment; central recording & management for ship‑borne full‑set marine & explosion‑proof surveillance cameras; video evidence storage for deck safety, cargo handling and navigation‑watch scenarios ✅ Off‑shore Oil‑&‑Gas Installations: FPSOs, fixed offshore production platforms ‑ Offshore‑platform control‑room cabinet installation; unified video recording for open‑deck hazardous‑zone explosion‑proof cameras and non‑hazardous‑area marine cameras ✅ Offshore Support Vessels: Offshore supply‑service vessels ‑ Cabinet‑mount central video recording for on‑board multi‑camera surveillance system

Installation: Standard 19‑inch rack‑mount inside indoor equipment‑cabin / control‑room. For hazardous classified zones, the NVR must be installed inside certified explosion‑proof enclosure. Compatible with KAIDUNTECH full‑series marine cameras, monitors and explosion‑proof accessories to build complete end‑to‑end maritime surveillance solution.


✨ Core Product Highlights

✅ DNV Type‑Approved & Compliant with IEC 60945 Marine Standards Obtains official DNV type‑approval and fully complies with IEC 60945 marine environmental and EMC specifications. Complete certification documentation is available for ship‑class‑survey submission and offshore‑EPC acceptance review for new‑build and retrofit vessel projects.

✅ 64‑Channel High‑Density IP Video Input & Multi‑Stream Decoding Supports up to 64‑channel IP camera access; adaptive multi‑stream decoding for high‑resolution marine cameras (4MP / 8MP). Supports real‑time preview, playback, backup, event‑search, meeting large‑system unified management requirements for vessels and offshore platforms.

✅ Hot‑Swap Hard‑Disk Bays with RAID Redundancy for Marine‑Critical Video Storage Multiple hot‑swap SATA hard‑disk trays, supports RAID0 / RAID1 / RAID5 / RAID6 / RAID10 storage modes. Hot‑swap design allows disk replacement without power‑off. Protects important maritime surveillance video data against disk failure and marine‑vibration risks.

✅ Multi‑Network‑Port Isolated Network Architecture Multiple independent Gigabit Ethernet ports. Separates camera receiving data network and equipment management network, effectively preventing network congestion, adapting complex ship‑board cabinet network deployment.

✅ Dual‑Power‑Supply for Marine Redundant Power‑System Supports dual‑power‑input (AC & DC). Redundant power‑supply architecture eliminates single‑point‑of‑failure risk, adapting typical new‑build and retrofit vessel power‑distribution schemes.

✅ Local High‑Definition Display Output & Alarm I/O Interface Equipped with HDMI and VGA video output interfaces for direct connection to marine‑grade monitors. Built‑in alarm‑input and alarm‑output terminals, supporting linkage with vessel alarm‑systems for motion detection, video loss and external‑sensor events.

✅ ONVIF Protocol Compatibility for Mixed Marine Camera Ecosystem Fully ONVIF‑compliant. Seamlessly connects KAIDUNTECH marine PTZ, dome, fixed and explosion‑proof cameras as well as third‑party ONVIF‑compliant maritime IP devices, achieving unified preview, recording and playback.

✅ Marine‑Qualified EMC & Environmental Adaptability Passes full marine‑specified EMC immunity tests against radar, radio and navigation‑system interference. Designed for cabinet‑mount operation in marine equipment‑rooms with temperature and humidity fluctuation. Supports standard 19‑inch rack‑mount installation.


📋 Key Specification

Item Parameter
Model KD‑NVR64 64‑Channel Marine‑Grade Network Video Recorder
Certifications DNV Type‑Approval; Compliant with IEC 60945
IP Camera Input Max 64‑channel IP camera access
Decoding Capacity Multi‑stream adaptive decoding for 4MP / 8MP high‑resolution streams
Storage Multiple hot‑swap SATA hard‑disk bays; Support RAID0/1/5/6/10
Network Interface Multiple independent Gigabit Ethernet ports
Local Video Output HDMI, VGA
Alarm Interface Alarm‑input / Alarm‑output terminals
Protocol ONVIF
Power Supply AC & DC dual‑power‑input (redundant power)
Installation Standard 19‑inch rack‑mount (indoor cabinet‑mount only)
Application Note Install inside non‑hazardous equipment‑cabin; requires certified Ex‑enclosure if deployed in classified hazardous‑zones
Matching Devices KAIDUNTECH marine PTZ, dome, fixed & explosion‑proof IP cameras, marine LCD monitors

📦 Lead‑Time & Warranty Terms

Item Details
Standard Model 3‑4‑week production lead‑time upon deposit receipt
Custom‑modified Version 5‑6‑week lead‑time for interface, firmware or function adjustments

Deliverables: Datasheet, mechanical dimension drawings, copies of DNV type‑approval certificate, operation manual. Complete documentation package supporting new‑ship‑building / vessel‑retrofit class‑survey and safety‑acceptance submission.

Warranty Terms ‑ 12‑month standard full‑unit warranty. Extended‑warranty duration negotiable via separate commercial quotation. ‑ Defective hardware supports factory‑return repair or replacement service. ‑ Value‑added support: remote configuration‑guidance, marine‑project‑oriented technical‑document support for new‑build ship and vessel‑retrofit projects.

Packaging & Logistics: Export‑grade carton / wooden‑crate packaging. Supports EXW, FOB and other international‑trade terms. Consolidated shipment available with marine‑spec cameras and monitors.

⚠️ Reminder: KD‑NVR64 is DNV type‑approved marine‑grade NVR for indoor cabinet‑mount installation inside non‑hazardous equipment‑rooms / control‑rooms. NOT for direct open‑deck deployment. If installed within Zone 1 / Zone 2 classified hazardous‑areas onboard vessels or offshore platforms, the unit must be fully enclosed inside third‑party certified explosion‑proof housing. Off‑the‑shelf stock cannot be guaranteed. Please place orders sufficiently ahead of ship‑building / vessel‑retrofit milestones. Installation must comply with IEC marine‑system safety‑regulations.


📝 Reference Success Stories 

Case 1 | New‑Build Container‑Ship Central Surveillance Recording Project

‑Project Challenges: New‑build large container‑ship requires DNV‑approved marine NVR for equipment‑room rack‑mount deployment. Need 64‑channel capacity to centrally manage dozens of marine PTZ, dome and explosion‑proof cameras. Require hot‑swap RAID storage for video‑data safety, multi‑Gigabit network ports for network isolation, AC‑DC redundant dual‑power‑supply, HDMI/VGA output connecting marine monitors. Must pass IEC 60945 marine EMC test, deliver DNV certification documents for ship‑class‑survey and integrate with whole‑ship CCTV system. ‑Solution: Rack‑mount KD‑NVR64 inside vessel equipment‑room. Configure RAID storage strategy, camera access parameters, alarm linkage rules; connect local marine LCD monitors via HDMI. ‑Outcome: DNV type‑approval satisfies ship‑class‑survey requirements. 64‑channel capacity realises unified recording and management for full‑ship multi‑type surveillance cameras. Redundant power and RAID mechanism guarantee reliability of maritime video archives. Surveillance recording subsystem successfully passed vessel acceptance.

Case 2 | FPSO Control‑Room Surveillance‑Storage Retrofit Project

‑Project Challenges: FPSO retrofit‑project for central video recording. Require DNV‑compliant 64‑channel marine NVR, to access existing marine and explosion‑proof IP cameras; support RAID hot‑swap storage; compatible with offshore marine monitors; satisfy periodic offshore safety‑audit documentation requirements. ‑Solution: 19‑inch rack‑mount KD‑NVR64 inside FPSO non‑hazardous control‑room cabinet. Complete network configuration, storage setup and output connection. ‑Outcome: Achieved stable centralised video recording and playback for FPSO multi‑point surveillance cameras. Retrofit storage subsystem passed offshore‑site safety‑acceptance.


❓ FAQ

Q1: What marine certification does KD‑NVR64 hold? A: KD‑NVR64 obtains DNV type‑approval, and complies with IEC 60945 marine environmental & EMC standards. Certification documents can be provided for new‑ship‑building and vessel‑retrofit class‑survey submission.

Q2: Can KD‑NVR64 be mounted directly on open‑deck? A: No. KD‑NVR64 is designed for indoor cabinet‑rack‑mount installation inside non‑hazardous equipment‑cabin / control‑room. It is not suitable for open‑deck salt‑spray‑exposed outdoor deployment.

Q3: How many IP cameras can KD‑NVR64 manage? A: Maximum 64‑channel IP camera input, supporting 4MP / 8MP high‑resolution marine‑grade and explosion‑proof IP cameras.

Q4: What storage‑protection features are available for marine projects? A: Multiple hot‑swap SATA hard‑disk bays, supporting RAID0 / RAID1 / RAID5 / RAID6 / RAID10. Hot‑swap allows disk replacement without power‑off, protecting critical maritime surveillance video data.

Q5: Why multi‑independent Gigabit network ports? A: Realises logical isolation between camera‑acquisition‑network and management‑network, avoiding network congestion under large‑channel marine surveillance system load.

Q6: What power‑supply modes are supported? A: AC & DC dual‑redundant power‑input, reducing single‑power‑point‑failure risk for ship‑board surveillance recording system.

Q7: Can it work with third‑party marine IP cameras? A: Yes, it supports ONVIF protocol, compatible with ONVIF‑compliant third‑party maritime IP cameras besides KAIDUNTECH camera series.

Q8: Installation requirement for classified hazardous‑zones? A: If deployed in Zone 1 / Zone 2 hazardous‑locations, the NVR itself must be housed inside separately certified explosion‑proof enclosure. It cannot be directly installed inside hazardous atmospheres.

Q9: Recommended accessories and custom‑order support? A: Recommended accessories: enterprise‑grade marine‑adapted surveillance hard disks, marine‑grade LCD monitors. Custom‑orders for interfaces and firmware‑features are available with 5‑6‑week lead‑time upon requirement confirmation.

Related Products
Send An Inquiry