Marine Integrated Multi‑Eye Surround‑View Dual‑Spectrum Camera

Place of Origin: China
Brand Name: KAIDUN
Model Number: MC225(VT)
Inquiry Now
Get a Quote
Specifications
Highlight Features

Marine Multi-Eye Surround-View Camera

,

Dual-Spectrum Multi-Eye Surround-View Camera

,

640x512 Multi-Eye Surround-View Camera

Visible Resolution:
8MP(3872*2192)
Thermal Resolution:
640*512
Stitched Field‑of‑View:
H ≥ 225°, V ≥ 49.6°
Thermal Lens:
4 mm, 90° FOV Per Channel
Power Supply:
DC 12 V
Operating Environment:
‑20 ℃ ~ +60 ℃; Humidity <100 %RH (non‑condensing)
Product Description

MC225(VT)

Marine Integrated Multi‑Eye Surround‑View Dual‑Spectrum Camera

MC225(VT) is KAIDUNTECH integrated multi‑eye surround‑view dual‑spectrum camera purpose‑built for marine vessel deployments. Multiple imaging modules deliver seamless on‑device image stitching, generating ≥225° horizontal panoramic field‑of‑view from one single mounting position. Each viewing segment integrates 8 MP visible‑light sensor and 640×512 thermal imaging detector, providing simultaneous high‑definition video and heat‑source detection for day‑and‑night operation. Constructed from 316 L stainless‑steel with IP66 ingress‑protection. Tolerates seawater salt‑spray, wave splash, high‑humidity and wide temperature fluctuation for open‑deck and mast‑mounted marine locations. Supports ONVIF protocol for integration with ship‑borne NVR, bridge displays and vessel VMS systems. Column‑platform mounting design for elevated observation points onboard ships and offshore installations.


🎯 Customer Pain Points

Ocean‑going vessel and offshore facility surveillance projects face these core challenges:

  1. Wide‑area maritime observation demand with limited mounting positions Traditional PTZ or fixed cameras only offer limited field‑of‑view. Installing multiple separate cameras creates blind zones, increases cabling workload and occupies scarce elevated mast / wheelhouse‑roof mounting space on vessels.
  2. Day‑night & adverse‑weather target detection requirement Visible‑only cameras lose performance at night or under thin fog conditions. Operators need both high‑detail colour imagery and thermal heat‑sensing capability to identify vessels, floating debris and hot‑spot hazards without extra separate thermal devices.
  3. Open‑deck harsh marine environmental conditions Exposed mast and deck locations suffer continuous salt‑spray, seawater splash, vibration and large temperature swings. Ordinary housings suffer rapid corrosion and seal failure in marine open‑air deployment.
  4. Simplified ship‑board system integration Marine surveillance hardware shall support standard open protocols to connect to existing on‑board NVR, bridge monitors and video management platforms, avoiding proprietary lock‑in and extra conversion hardware.
  5. Reliable high‑bandwidth transmission for panoramic high‑resolution streams Dual‑spectrum stitched panoramic video produces large‑size video streams. Ship‑board network infrastructure must match bandwidth requirements; hardware specifications need to be clear for tender and EPC bid‑compliance documentation.
  6. Multi‑functional on‑board safety monitoring requirements Modern vessels require concurrent capabilities: navigation lookout, deck‑work monitoring, anti‑boarding intrusion alert, early fire hot‑spot detection and law‑evidence recording, which are difficult to achieve with single‑spectrum conventional cameras.

MC225(VT) addresses all above‑mentioned pain‑points: Marine‑grade multi‑eye dual‑spectrum surround‑view camera. Single‑unit ≥225° stitched panoramic view, combining 8 MP visible‑light plus 640×512 thermal imaging. 316 L stainless‑steel IP66 housing for open‑deck / mast mounting. ONVIF‑compliant high‑resolution dual‑stream panorama output. Delivers navigation watch, deck supervision, intrusion warning and thermal hot‑spot early‑warning for merchant ships, patrol vessels and offshore installations.


🏭 Typical Application Scenarios

✅ Merchant & Ocean‑Going Vessels: Cargo ships, tankers, container ships ‑ Mast‑mounted navigation lookout; wide‑angle sea‑surface observation for nearby crafts, navigation marks and floating obstacles ‑ Main‑deck, bow‑stern working‑area monitoring: crew operation, cargo handling and over‑side work recording

✅ Marine Patrol & Law‑Enforcement Vessels: Patrol craft, fishery‑supervision, anti‑smuggling vessels ‑ 24‑h dual‑spectrum surveillance; capture visible‑light + thermal evidence of suspect targets for maritime law‑enforcement

✅ Ship‑Board Security & Fire Risk Prevention: ‑ Detect small‑craft approach and unauthorised boarding risk; thermal channel identifies abnormal deck hot‑spots for early fire‑hazard warning

✅ Off‑Shore & Coastal Facilities: Offshore platforms, port terminals ‑ Elevated high‑point wide‑area perimeter surveillance for offshore‑platform and shore‑side port sites

Installation: Column‑platform / pedestal mounting at unobstructed elevated positions (mast, wheelhouse roof). Keep clear of funnels and high‑temperature exhaust outlets. Reinforce bracket against vessel vibration. Use KAIDUNTECH marine corrosion‑resistant matching accessories for cable protection and termination. Post‑installation on‑site panorama calibration is required.


✨ Core Product Highlights

✅ Single‑Unit Multi‑Eye Stitched Panorama, H ≥225° Wide‑Angle Coverage Built‑in multi‑module hardware‑assisted image stitching. Delivers stitched panoramic output with horizontal FOV ≥225°, vertical FOV ≥49.6°. One camera replaces multiple discrete fixed cameras, saves mounting positions and reduces cabling complexity. Note: Not full 360° coverage; two units required for complete 360° monitoring.

✅ Dual‑Spectrum Visible‑Light + Thermal Imaging, Round‑the‑Clock Marine Observation ‑ Visible‑light: Each optical channel 8 MP (3872×2192), stitched panorama resolution up to 8192×1440, rich colour detail for deck operation and maritime‑target identification ‑ Thermal: 640×512 infrared detector per channel; stitched thermal panorama 1440×480. Detects heat sources in total darkness and thin fog; provides hot‑spot indication for potential fire risk. ‑ Frame rate >25 fps for both stitched visible‑light and thermal video streams.

✅ Marine‑Grade 316 L Stainless‑Steel IP66 Enclosure 316 L stainless‑steel housing, IP66 ingress‑protection. Resists seawater salt‑spray, wave splash and high‑humidity marine open‑deck / mast environment. Operating temperature: ‑20 ℃ ~ +60 ℃, humidity below 100 %RH (non‑condensing).

✅ Optimised for Vessel Vibration & Elevated Column‑Platform Mounting Designed for mast / wheelhouse‑roof column‑platform pedestal installation. Reinforced bracket is required to counteract persistent ship‑borne vibration. Re‑calibrate stitching after disassembly, refitting or dry‑dock mast‑structure modification. Single G3/4 cable‑entry port for marine‑spec cable‑gland connection.

✅ ONVIF Standard Protocol, Seamless Ship‑Board System Integration Fully ONVIF‑compliant, works with mainstream ship‑borne NVR, bridge display units and vessel VMS without proprietary drivers. Gigabit industrial switch and shielded marine network cable are recommended to handle high‑bandwidth panoramic dual‑spectrum video streams.

✅ Multi‑Scenario Marine‑Safety Functional Value Supports navigation lookout, deck‑operation recording, small‑vessel intrusion detection, thermal‑based fire‑risk hot‑spot early warning and maritime law‑enforcement evidence recording. Tender‑ready bid‑compliance datasheet available for marine EPC and new‑ship‑building projects.

✅ Simplified Matching Marine‑Accessory Ecosystem Compatible with KAIDUNTECH KDR‑1500 rubber flexible hose, KDSR‑1500 stainless‑steel flexible hose, KDJ004 anti‑corrosion junction box for full salt‑resistant cable‑protection and field‑termination.


📋 Key Specification

Item Parameter
Model MC225(VT) Marine Integrated Multi‑Eye Surround‑View Dual‑Spectrum Camera
Visible‑light Single‑Eye Resolution 8 MP (3872 × 2192)
Thermal Single‑Channel Resolution 640 × 512
Stitched Visible‑Light Panorama 8192 × 1440
Stitched Thermal Panorama 1440 × 480
Stitched Field‑of‑View H ≥ 225°, V ≥ 49.6°
Frame Rate >25 fps
Visible‑Light Lens 4 mm, 1/1.8″ sensor
Thermal Lens 4 mm, 90° FOV per channel
Power Supply DC 12 V
Max Power Consumption ≤40 W
Housing Material 316 L Stainless‑Steel
Ingress Protection IP66
Operating Environment ‑20 ℃ ~ +60 ℃; humidity <100 %RH (non‑condensing)
Storage Environment ‑20 ℃ ~ +60 ℃; humidity <100 %RH (non‑condensing)
Cable Entry G3/4 single entry hole
Installation Column‑platform / pedestal mounting
Network Protocol ONVIF
Notes On‑site panorama calibration required after installation / re‑mounting; Gigabit network recommended; Not 360° coverage

📦 Lead‑Time & Warranty Terms

Item Details
Standard Model 3‑4‑week production lead‑time upon deposit receipt
Custom‑modified Version Contact sales for custom‑hardware / firmware modification lead‑time

Deliverables: Datasheet, mechanical dimension drawings, bid‑compliance summary document, installation manual.

Warranty Terms ‑ 12‑month standard full‑unit warranty. Extended‑warranty duration negotiable via separate commercial quotation. ‑ Defective hardware supports factory‑return repair or replacement service. ‑ Value‑added support: remote installation‑calibration guidance, technical‑document support for new‑ship‑building and offshore‑EPC tender projects.

Packaging & Logistics: Export‑grade wooden‑crate packaging. Supports EXW, FOB and other international‑trade terms. Consolidated shipment available together with matching marine‑spec accessories.

⚠️ Reminder: MC225(VT) is marine‑grade multi‑eye dual‑spectrum surround‑view camera for mast and open‑deck installation. It delivers ≥225° horizontal panorama (not full 360°). Requires on‑site image‑stitching calibration after installation or re‑installation. Keep away from funnel and high‑temperature exhaust outlets. Reinforce mounting bracket for vessel vibration. Gigabit network infrastructure is required for high‑resolution dual‑spectrum video streams. This camera is supplementary surveillance equipment and shall not replace radar or human navigation lookout. Comply with local marine‑system installation‑regulations.


📝 Reference Success Stories (Marine‑Offshore Cases)

Case 1 | New‑Build Multi‑Purpose Vessel Mast‑Mount Surround‑View Surveillance Project

‑Project Challenges: New‑build multi‑purpose vessel required mast‑mount wide‑angle surveillance. Need single‑unit large‑coverage dual‑spectrum (visible‑light + thermal) panoramic camera for navigation lookout and main‑deck working‑area monitoring. Must resist salt‑spray open‑deck environment; ONVIF compatibility to integrate with on‑board VMS; deliver bid‑compliance documentation for ship‑yard tender submission. High‑resolution dual‑stream video required, with consideration for vessel‑borne vibration and post‑mounting calibration. ‑Solution: Install MC225(VT) via reinforced column‑platform pedestal on vessel mast. Deploy matching KDSR‑1500 stainless‑steel flexible hose and KDJ004 anti‑corrosion junction‑box. Complete on‑site panorama stitching calibration, connect to ship‑borne gigabit network and vessel VMS platform. ‑Outcome: Single‑unit ≥225° panoramic dual‑spectrum monitoring fulfils sea‑surface navigation‑watch and main‑deck operation‑recording. Thermal channel provides night‑time target‑detection and hot‑spot fire‑risk hints. System passed ship‑yard acceptance test.

Case 2 | Offshore‑Platform Elevated‑Point Wide‑Area Perimeter‑Monitoring Retrofit Project

‑Project Challenges: Offshore‑platform retrofit‑project for elevated‑point wide‑area perimeter surveillance. Require dual‑spectrum multi‑eye panoramic camera for day‑night target detection; salt‑resistant housing for offshore environment; compatible with existing platform VMS. ‑Solution: Column‑platform mount MC225(VT) at platform elevated observation position, equip marine‑corrosion‑resistant cable accessories, finish on‑site stitching calibration and network configuration. ‑Outcome: Achieved wide‑area dual‑spectrum perimeter monitoring for offshore‑platform. Retrofit surveillance subsystem passed site safety‑acceptance.


❓ FAQ

Q1: Does MC225(VT) deliver full 360‑degree panoramic view? A: No. Horizontal stitched field‑of‑view ≥225°. If complete 360‑degree coverage is required, two MC225(VT) units shall be considered.

Q2: What benefits does dual‑spectrum (visible‑light + thermal) bring for marine‑vessel use? A: 8 MP visible‑light supplies rich colour details for deck‑work and maritime‑target identification. The 640×512 thermal channel detects heat‑sources under darkness and thin fog; it can give early indication of abnormal hot‑spots for potential fire hazards. Thermal‑channel temperature‑threshold alarm logic needs configuration on back‑end VMS / NVR platform.

Q3: Why is on‑site calibration necessary? A: Multi‑eye image‑stitching relies on precise relative‑position of each optical module. Calibration must be performed after first‑time installation, or whenever camera is dismounted / re‑mounted or mast‑structure modified during dry‑docking.

Q4: What network requirement does this camera have? A: It outputs high‑resolution stitched visible‑light and thermal panoramic streams. Gigabit industrial switch plus shielded marine network cable are strongly recommended. Please evaluate ship‑board network bandwidth before project implementation.

Q5: Where cannot this camera be installed? A: Keep installation position away from funnels and exhaust outlets, to avoid ambient temperature exceeding upper operating limit +60 ℃. Reinforce mounting bracket against continuous vessel‑borne vibration.

Q6: What matching marine accessories are recommended? A: KDR‑1500 rubber flexible hose (non‑direct wave‑splash area); KDSR‑1500 stainless‑steel flexible hose (exposed mast / deck); KDJ004 anti‑corrosion junction‑box for cable‑field‑termination.

Q7: Is this camera a replacement for radar or human lookout? A: No. MC225(VT) functions as auxiliary surveillance equipment only. It cannot replace radar or human officer‑of‑the‑watch navigation lookout. Detection performance will degrade under heavy‑rain and dense‑fog conditions.

Q8: What are environmental‑specifications? A: Operating temperature:‑20 ℃ ~ +60 ℃; IP66; 316 L stainless‑steel housing, suitable for salt‑spray exposed mast and open‑deck marine deployment.


📎 Optional Accessories List

‑ KDR‑1500 Rubber Flexible Hose

‑ KDSR‑1500 Stainless‑Steel Flexible Hose

‑ KDJ004 Anti‑Corrosion Junction Box

Send An Inquiry