QFCI‑FL
10‑Core Halogen‑Free Low‑Smoke Marine Armored Fiber Optic Cable
QFCI‑FL is 10‑core halogen‑free low‑smoke marine‑grade armored fiber optic cable adopting loose‑tube fiber structure. Reinforced with steel‑wire strength member, SHF1 inner sheath, galvanized steel‑wire braid armour (coverage ≥90%) and SHF1 outer sheath. Complies with IEC 60092‑360 marine fiber‑cable standard, IEC 60332‑3‑22 Cat A flame resistance, low‑smoke‑low‑toxic halogen‑free performance. Excellent mechanical properties for tension, crush, impact, torsion and bending. Operating temperature ‑40 ℃ ~ +85 ℃. Optimised for ship‑board and offshore fixed‑lay optical‑fibre data transmission, meeting marine‑project acceptance requirements for new‑build and refit vessels.
🎯 Customer Pain Points
Ship‑board and offshore optical‑communication projects frequently face real‑world maritime‑specific challenges:
- Strict marine fire‑safety requirements In‑vessel fire scenarios, ordinary cables release toxic halogen smoke which endangers crew safety. Marine‑grade fiber cables require halogen‑free, low‑smoke, low‑acid‑gas and high‑grade flame‑retardant performance.
- Severe mechanical stress during marine cable laying & service During cabling inside cable trunks, bulkhead penetration and deck installation, fiber cables suffer tension, extrusion, impact and torsion. Without reliable armour, fragile optical‑fibres are easily damaged, causing communication outages.
- Full‑set marine‑standard compliance requirement Marine optical‑fibre cables need to satisfy IEC 60092‑360 marine fiber‑cable specification for ship‑project review and acceptance.
- Wide‑temperature environmental adaptability Vessels navigate across polar to tropical zones. Fiber cable must maintain stable optical‑transmission performance over broad ‑40 ℃ ~ +85 ℃ temperature range.
- Oil‑resistant & UV‑resistant capability On‑board environments expose cables to oil contamination and ultraviolet radiation. Sheath material shall feature oil‑resistance and UV‑aging‑resistance.
- Project‑schedule risk for marine‑grade halogen‑free armored fiber cable Special marine fiber‑optic cables belong to key ship‑building communication materials. Unclear lead‑times may delay new‑build and vessel‑refit milestones.
QFCI‑FL addresses all above‑mentioned pain‑points: 10‑core halogen‑free low‑smoke armored marine fiber cable. IEC marine‑standard compliant, outstanding mechanical strength, flame‑retardant low‑smoke halogen‑free property. Designed for ship‑board and offshore fixed‑lay optical‑data‑transmission.
🏭 Typical Application Scenarios
✅ Merchant Cargo Vessels: Bulk carriers, container ships | Ship‑board LAN backbone, surveillance‑system optical‑fibre interconnection, cabin‑to‑cabin data transmission ✅ Special‑Purpose Work Vessels: Offshore supply vessels, engineering vessels | Off‑shore auxiliary‑module optical communication wiring ✅ Off‑shore Facilities: Off‑shore auxiliary modules | Fixed‑lay fiber‑optic link for non‑hazard‑zone network systems ✅ Heavy‑Duty Industrial Sites: Petrochemical plants | Halogen‑free low‑smoke armored fiber‑optic wiring
Installation: Fixed laying inside cable trunk / bulkhead penetration. Match with marine fiber glands and junction boxes for complete marine optical‑wiring solution.
✨ Core Product Highlights
✅ Halogen‑Free Low‑Smoke Low‑Toxic Fire‑Safety Performance Halogen‑free low‑smoke material formulation. Acid‑gas release ≤5 mg/g, burning‑gas pH≥4.3. Passes IEC 60332‑3‑22 Cat A flame‑resistance test. Minimise toxic‑smoke hazard to crew under fire‑accident conditions, complying with marine fire‑safety regulations.
✅ Robust Multi‑Layer Armoured Mechanical Structure ‑Fiber unit: Loose‑tube PBT fiber; steel‑wire strength‑member for tensile‑reinforcement ‑Inner sheath: SHF1; Galvanized steel‑wire braid armour (coverage ≥90 %) ‑Outer sheath: SHF1 black (custom colour available) Excellent mechanical indexes: Long‑/short‑term tensile strength 600 N /1500 N; long‑/short‑term crush resistance 1000 N /3000 N per 100 mm. Resists tension, crush, impact, torsion during laying and long‑term service.
✅ Full IEC Marine‑Fiber‑Standard Compliance Complies with IEC 60092‑360 marine fiber‑cable specification; meets IEC 60793‑1‑40, IEC 60794‑2 optical‑performance criteria. Passes IEC series mechanical test items (tension, crush, impact, torsion, bending). SHF1 sheath delivers oil‑resistance (IRM902 @70 ℃ × 4H) and UV‑resistance (UL1581).
✅ Wide Operating‑Temperature & Reliable Optical Transmission Operating / storage temperature: ‑40 ℃ ~ +85 ℃. Static bending radius ≥10D; dynamic bending radius ≥20D. Outer diameter 10.0±1.0 mm, weight 130±10 kg/km. Stable optical‑signal performance under extreme temperature variation.
✅ 10‑Core fiber count for marine backbone networking 10‑core loose‑tube fiber design, suitable for ship‑board backbone network, multi‑service surveillance and communication‑system optical‑interconnection. Supports custom‑order for fibre‑count and sheath colour.
📋 Key Specification
| Item |
Parameter |
| Model |
QFCI‑‑FL 10‑Core Halogen‑Free Low‑Smoke Marine Armored Fiber Cable |
| Fiber Structure |
Loose‑tube(PBT) fiber, steel‑wire strength‑member |
| Armour |
Galvanized steel‑wire braiding, coverage ≥90 % |
| Inner / Outer Sheath |
SHF1; outer‑sheath colour black (customisable) |
| Fiber Count |
10 core |
| Outer Diameter |
10.0±1.0 mm |
| Weight |
130±10 kg/km |
| Mechanical Performance |
Tensile:600 N(long)/1500 N(short); Crush:1000 N/3000 N per100mm; Impact, torsion compliant with IEC60794‑1‑2 |
| Bending Radius |
Static ≥10D; Dynamic ≥20D |
| Flame & Smoke |
IEC60332‑3‑22 Cat A; Acid‑gas ≤5 mg/g; PH≥4.3 |
| Special Properties |
Oil‑resistance IRM902(70℃×4H); UV‑resistance UL1581 |
| Standards |
IEC 60092‑360, IEC 60794‑1‑2 series |
| Operating / Storage Temp |
‑40 ℃ ~ +85 ℃ |
| Installation |
Fixed laying for cable‑trunk & bulkhead penetration |
📦 Lead‑Time & Warranty Terms
| Item |
Details |
| Standard Model |
3‑4‑week production lead‑time upon deposit receipt |
| Custom‑modified Version |
5‑6‑week lead‑time for custom fibre‑count, sheath‑colour, sheath‑material adjustments |
Deliverables: Datasheet, test‑report excerpts, operation manual for new‑build / refit marine‑project review & acceptance submission.
Warranty Terms ‑ 12‑month standard warranty under correct installation & laying conditions. ‑ Defective hardware supports factory‑return repair or replacement service. ‑ Value‑added support: marine‑fiber‑cable laying technical‑guidance, bidding‑support documentation.
Packaging & Logistics: Export‑grade reel‑packaging. Supports EXW, FOB and other international‑trade terms. Consolidated shipment with marine cameras, cables and accessories.
⚠️ Reminder: QFCI‑FL marine fiber cable for fixed‑lay application only. Actual performance depends on laying workmanship. Off‑the‑shelf stock cannot be guaranteed, please place orders ahead of project milestones. For hazardous‑zone deployment, use certified explosion‑proof fiber‑glands and junction boxes.
📝 Reference Success Stories
Case 1 | New‑Build Offshore Supply Vessel On‑Board Backbone Optical‑Network Project
‑Project Challenges: New‑build offshore supply vessel requires 10‑core halogen‑free low‑smoke armored marine fiber for ship‑board backbone and surveillance‑system optical‑interconnection. Must satisfy IEC 60092‑360 marine fiber‑cable standard, Cat A flame‑retardant halogen‑free low‑smoke performance, robust mechanical resistance against tension/crush/impact, wide‑temperature‑range operation; documents for marine‑equipment acceptance. ‑Solution: Adopt QFCI‑‑FL marine armored fiber‑optic cable, deployed in cable‑trunk with matched marine fiber‑glands and junction‑boxes. ‑Outcome: Halogen‑free low‑smoke fire‑safety meets marine‑safety requirements. Armour structure protects optical‑fibres during laying and operation. Stable optical‑transmission for whole‑ship surveillance and network backbone. Project passed vessel‑equipment acceptance.
Case 2 | Coastal Cargo‑Ship Surveillance‑System Optical‑Network Refit Project
‑Project Challenges: In‑service coastal cargo‑ship refit‑project. Upgrade existing network with marine‑grade halogen‑free armored fiber‑optic cable for surveillance‑system backbone, to satisfy periodic marine‑equipment inspection. ‑Solution: Lay QFCI‑‑‑FL marine fiber‑optic cable complying with marine‑cable‑laying specifications. ‑Outcome: Reliable optical‑fibre data transmission. Fire‑safety and mechanical‑properties satisfy vessel‑safety‑management requirements, refit‑project completed acceptance.
❓ FAQ
Q1: What are the key features of QFCI‑‑‑‑FL marine fiber‑optic cable? A: It is 10‑core loose‑tube marine armored fiber‑optic cable, halogen‑free low‑smoke low‑toxic, IEC 60092‑360 compliant. Galvanized steel‑wire braid armour provides superior mechanical protection, Cat A flame‑retardant, operating temperature‑40 ℃ ~ +85 ℃ for ship‑board fixed‑lay optical‑communication.
Q2: What is the purpose of halogen‑free low‑smoke design? A: Under fire‑accident conditions, halogen‑free low‑smoke material releases very little toxic acid‑gas and smoke, reducing hazard for crew, complying with strict marine fire‑safety codes.
Q3: What mechanical advantages does galvanized steel‑wire braid armour bring? A: Steel‑wire braid armour greatly improves tensile, crush, impact and torsion resistance, protecting fragile optical‑fibres during laying inside cable‑trunk and long‑term ship‑board operation.
Q4: Can fibre‑count and sheath‑colour be customised? A: Yes, custom‑order supports different fibre‑count and sheath‑colour. Custom lead‑time is 5‑6 weeks upon requirement confirmation.
Q5: What accessories are recommended? A: Recommended accessories: marine‑grade fiber‑optic cable glands, anti‑corrosion junction boxes. Hazardous‑zone deployment requires ATEX‑certified explosion‑proof accessories.
Q6: What installation requirements should be noted? A: For fixed‑lay only; strictly follow static / dynamic bending‑radius requirement (static ≥10D, dynamic ≥20D). Avoid sharp‑angle bending and excessive pulling force.