CJ86‑SC 3×1.5mm²
CCS‑Type‑Approved Marine‑Grade Power Cable
CCS type‑approved CJ86‑SC 3×1.5 mm² marine‑grade power & control cable. Constructed with copper conductor, EPR insulation, copper‑wire braid screen, steel‑wire braid armour and composite outer sheath. Fully complies with IEC 60092 series marine cable standards, flame‑retardant and fire‑resistant performance. Designed for ship‑board power, lighting and control circuits; also applicable for metallurgy, chemical plant, power station and mine installations. Delivers reliable power transmission for new‑build and refit vessel & offshore projects and meets official CCS ship‑survey requirements.
🎯 Customer Pain Points
Ship‑board and offshore electrical projects frequently face these real‑world practical challenges:
- Mandatory marine classification certification Ship‑board power‑control cables require valid CCS type‑approval. Non‑certified cables will be rejected during CCS ship‑survey and cannot be adopted for vessel construction and refit.
- Complex anti‑interference requirement on‑board vessels Ships are full of high‑power electrical equipment generating heavy electromagnetic interference. Un‑screened cables cause signal distortion and control‑circuit malfunction.
- Mechanical‑damage risk on‑board Cables laid along ship bulkheads, decks and cable trunks face extrusion, pulling and abrasion. Without armour protection, cables are easy to suffer mechanical damage.
- Strict flame‑retardant & fire‑safety requirement for marine vessels Maritime places have high fire‑safety standards. Cables shall pass IEC flame‑retardant and fire‑resistant test to restrain flame spread under fire‑accident scenarios.
- Multi‑industry cross‑application demand Besides ship‑board usage, projects such as chemical plants, power plants and mines also need robust screened armoured power‑control cables with unified international‑standard compliance.
- Project‑schedule risk for CCS‑approved marine power cable CCS‑certified marine special cables belong to key ship‑building materials. Unclear delivery lead‑times may delay new‑build and vessel‑refit project milestones.
CJ86‑SC 3×1.5mm² addresses all above‑mentioned pain‑points: CCS‑approved 3‑core 1.5 mm² screened & armoured marine‑grade power‑control cable, complying with full IEC marine‑cable standards, flame‑retardant fire‑resistant. For ship‑board power, lighting and control‑circuit deployment, also suitable for heavy‑duty industrial sites.
🏭 Typical Application Scenarios
✅ Merchant Cargo Vessels: Bulk carriers, container ships, multi‑purpose vessels | Ship‑board power supply, lighting circuit and equipment control wiring ✅ Special‑Purpose Work Vessels: Offshore supply vessels, engineering vessels, maritime patrol crafts | Cabin and deck power‑control system wiring ✅ Off‑shore Facilities: Off‑shore auxiliary modules | Power‑control wiring for non‑hazard zones ✅ Heavy‑Duty Industrial Sites: Metallurgical plant, chemical works, power station, mine | Industrial power‑control cable deployment
Installation: Suitable for cable‑trunk, bulkhead and fixed laying. Cooperate with marine cable glands and junction boxes to realise complete marine wiring solution.
✨ Core Product Highlights
✅ Official CCS Type‑Approval & Full IEC Standard Compliance Obtains CCS type‑approval. Conforms to IEC 60092‑350 / 351 / 352 / 353 / 354 / 359 and related IEC flame‑retardant, fire‑resistance, smoke‑toxicity test standards. Complete certification documents available for CCS ship‑survey submission.
✅ Professional Multi‑Layer Marine‑Grade Cable Structure ‑Conductor: Copper conductor ‑Insulation: EPR insulation ‑Screen: Copper‑wire braid shielding for electromagnetic interference suppression ‑Armour: Steel‑wire braid armour for anti‑crush and anti‑abrasion mechanical‑protection ‑Inner / Outer sheath: PCP/PVC/SHF composite sheath construction Calculated outer diameter:10.0 mm; calculated weight 154.9 kg/km.
✅ Flame‑Retardant & Fire‑Resistant Safety Performance Passes IEC 60332‑1, IEC 60332‑3‑22 Cat.A flame‑retardant, IEC 60331 fire‑resistant test, restrains flame propagation under fire‑accident conditions, improves ship‑board electrical‑system safety.
✅ Excellent Anti‑Interference & Mechanical‑Protection Copper‑wire braided screen effectively suppresses ship‑board electromagnetic interference and guarantees stable control‑signal transmission. Steel‑wire braid armour resists pulling, extrusion and abrasion during laying and long‑term service.
✅ Wide‑Scope Application Scenarios Mainly used for ship‑board power, lighting and control‑system wiring; also adaptable for metallurgy, chemical plant, power‑plant, mine and other heavy‑duty industrial fixed‑wiring occasions.
📋 Key Specification
| Item |
Parameter |
| Model |
CJ86‑SC 3×1.5 mm² Marine‑Grade Power Cable |
| Core & Cross‑Section |
3 cores × 1.5 mm² |
| Conductor |
Copper |
| Insulation |
EPR |
| Screen |
Copper‑wire braid screen |
| Armour |
Steel‑wire braid armour |
| Sheath |
PCP/PVC/SHF composite inner & outer sheath |
| Main Standards |
IEC 60092‑350‑359; IEC 60331 fire‑resistant; IEC 60332 series flame‑retardant |
| Certification |
CCS Type Approval |
| Calculated Outer Diameter |
10.0 mm |
| Calculated Weight |
154.9 kg/km |
| Application |
Ship‑board power / lighting / control circuit; metallurgy, chemical, power‑plant, mine |
📦 Lead‑Time & Warranty Terms
| Item |
Details |
| Standard Model |
3‑4‑week production lead‑time upon deposit receipt |
| Custom‑modified Version |
5‑6‑week lead‑time for custom core quantity, cross‑section, sheath‑material adjustments |
Deliverables: Datasheet, test‑report excerpts, CCS‑certificate copies for ship‑build / refit project review and ship‑survey submission.
Warranty Terms ‑ 12‑month standard warranty under correct installation and laying conditions. ‑ Defective hardware supports factory‑return repair or replacement service. ‑ Value‑added support: marine‑cable laying technical‑guidance, bidding‑support documentation.
Packaging & Logistics: Export‑grade reel‑packaging. Supports EXW, FOB and other international‑trade terms. Consolidated shipment with marine junction‑boxes, cable‑glands and surveillance‑equipment orders.
⚠️ Reminder: CJ86‑SC 3×1.5 mm² is CCS‑approved marine power‑control cable. Confirm required total length before ordering. For hazardous‑zone deployment, shall cooperate with certified explosion‑proof cable‑glands and junction‑boxes. Off‑the‑shelf stock cannot be guaranteed, place orders ahead of project milestones.
📝 Reference Success Stories
Case 1 | New‑Build Offshore Supply Vessel On‑Board Power‑Control Wiring Project
‑Project Challenges: New‑build offshore supply vessel requires CCS‑approved marine power‑control cables for cabin and deck fixed laying. Needs anti‑EMI shielding, mechanical armour‑protection and IEC‑standard flame‑retardant fire‑safety performance; documents shall be supplied for CCS ship‑survey acceptance. ‑Solution: Adopt CJ86‑SC 3×1.5 mm² marine‑grade cable, matched with marine cable‑glands and anti‑corrosion junction‑boxes for wiring construction. ‑Outcome: CCS‑certification meets ship‑survey requirements. Shielded‑armoured structure resists on‑board electromagnetic interference and mechanical damage. Flame‑retardant performance improves vessel electrical‑safety. Project passed vessel‑equipment acceptance.
Case 2 | Coastal Cargo‑Ship Electrical‑System Refit Project
‑Project Challenges: In‑service coastal cargo‑ship refit‑project. Replace old ordinary cables, require CCS‑qualified multi‑core screened‑armoured power‑control cable, satisfy periodic CCS ship‑inspection requirements. ‑Solution: Deploy CJ86‑SC 3×1.5 mm² marine‑grade power‑control cable in accordance with marine‑cable‑laying specifications. ‑Outcome: Stable power‑and‑control‑circuit operation. Passed class‑society inspection requirements, completed refit‑project acceptance.
❓ FAQ
Q1: What certification does CJ86‑SC 3×1.5 mm² have? A: It obtains CCS Type‑Approval, complies with full set of IEC 60092 marine‑cable standards plus IEC flame‑retardant and fire‑resistance standards. Certification documents can be provided for ship‑survey submission.
Q2: What is the function of copper‑wire braid screen and steel‑wire braid armour? A: Copper‑wire braid screen suppresses ship‑board electromagnetic interference and stabilises control‑circuit signals. Steel‑wire braid armour provides mechanical protection against pulling, extrusion and abrasion during laying and long‑term operation.
Q3: What scenarios is this cable suitable for? A: Primarily for ship‑board power, lighting and control‑system fixed laying; also applicable for metallurgical plants, chemical plants, power stations, mines and other heavy‑duty industrial wiring.
Q4: Is customisation available? A: Customisable core‑count, conductor cross‑section and sheath‑material. Custom‑order lead‑time 5‑6 weeks upon requirement confirmation.
Q5: What accessories are recommended? A: Recommended accessories: marine‑grade cable glands, anti‑corrosion junction boxes. When used in hazardous zones, must adopt ATEX‑certified explosion‑proof accessories.