MC800‑B
4MP 18X Marine Bullet IR IP Camera with Wiper
CCS‑approved marine‑grade bullet IR IP camera integrated with lens wiper, compliant with BS EN62676 and CE‑EN60945 marine standards. The custom‑engineered bracket supports multi‑angle fixing and rotation for flexible field‑of‑view adjustment. Equipped with 18× optical zoom (5.5‑99 mm), 4MP high‑resolution imaging, digital defog capability and local SD‑card network‑break backup recording. Built‑in wiper removes seawater splash, rainwater and salt residue for open‑deck deployment. Delivers sharp long‑range day‑night surveillance and fully satisfies CCS class‑survey acceptance criteria for ship‑building and vessel refit projects.
🎯 Customer Pain Points
Vessel and offshore surveillance projects frequently face these practical maritime‑specific challenges:
- Mandatory CCS classification certification Ship periodic safety inspection requires valid CCS type‑approval. Non‑certified cameras are prohibited for ship‑board installation and will fail official class‑society surveys.
- Lens fouling caused by open‑deck sea spray and salt deposits Cameras mounted on exposed decks suffer salt‑stains, rain and seawater splashes on the lens window. Manual cleaning for high‑position units brings safety risks and high maintenance workload, dirty lens results in blurred monitoring footage.
- Requirement for high‑definition long‑range observation Ship crews need to inspect distant mooring equipment, deck machinery and offshore targets. Conventional low‑zoom cameras cannot capture fine details over long observation distances.
- Image degradation under sea‑fog & haze conditions Marine fog and salt haze often reduce image sharpness, making distant targets hard to identify and interfering with safety monitoring duties.
- Risk of video data loss during onboard network outage Unstable ship‑borne network may lead to video recording gaps. Customers need local backup mechanism to avoid losing critical security footage.
- Flexible angle adjustment for diversified deck mounting positions Different deck installation locations demand versatile angle tuning; additional adapters raise project cost if camera bracket lacks multi‑rotate function.
- Wide temperature & high‑humidity onboard operating environment Vessels navigate across cold polar waters and hot tropical zones. Hardware must operate reliably under large temperature fluctuation and non‑condensing high humidity.
- Project schedule uncertainty for specialized marine certified hardware CCS‑approved marine cameras belong to niche maritime security equipment. Unclear production lead‑time may delay new‑build and vessel‑refit project milestones.
MC800‑B addresses all above‑mentioned maritime pain‑points: CCS‑qualified 4MP 18× long‑zoom marine bullet camera with integrated wiper, digital defog and SD‑card broken‑network recording. Purpose‑built for exposed open‑deck locations, delivering class‑compliant long‑range 24‑hour surveillance for merchant ships, work vessels and offshore auxiliary facilities.
🏭 Typical Application Scenarios
✅ Merchant Cargo Vessels: Bulk carriers, container ships, general‑cargo vessels | Open‑deck long‑range monitoring, mooring zone observation, hull‑side inspection, superstructure exterior surveillance
✅ Special‑Purpose Work Vessels: Offshore supply vessels, engineering vessels, maritime patrol crafts | Distant working‑deck equipment monitoring, offshore target identification
✅ Off‑shore Facilities: Coastal offshore auxiliary modules | Non‑hazard long‑range outdoor marine surveillance (non‑Ex application)
✅ Coastal On‑shore Sites: Port wharves and harbour perimeter exposed to salt‑spray atmosphere | Secondary land‑based long‑range deployment
Installation: Multi‑angle adjustable integrated bracket. Fully compatible with KAIDUNTECH marine‑grade accessories for complete end‑to‑end marine surveillance solution.
✨ Core Product Highlights
✅ Official CCS Marine‑Classification Compliance CCS Type Approval, meets BS EN62676, CE‑EN60945 and relevant EMC marine test standards. Full set of certification documents available for ship‑survey submission.
✅ Built‑in Lens Wiper for Open‑deck Marine Environment Integrated windshield wiper efficiently wipes seawater splash, rain drops and salt‑scale dirt from lens surface. Minimises high‑risk manual maintenance for high‑mounted deck cameras and maintains stable optical clarity.
✅ 4MP High‑Definition & Powerful 18× Optical Long‑Zoom 4MP high‑resolution sensor, 18× motorized optical zoom with focal range 5.5 mm‑99 mm, aperture F1.78(W)‑F3.73(T). SNR>52 dB. Supports multi‑resolution main‑stream output up to 2688×1520. OSD overlay includes timestamp, PTZ‑coordinate, zoom value, preset position and serial information for operational reference.
✅ Digital Defog & Intelligent Event Detection Digital defog algorithm improves image visibility under sea‑fog and salt‑haze weather. Smart functions include motion detection, video occlusion detection and audio anomaly detection for proactive vessel security alerts.
✅ Local SD‑Card Backup for Network Interruption Supports SD‑card broken‑network cache supplementary recording. Critical surveillance footage can be saved locally when ship‑borne network connection fails, preventing important video data loss.
✅ Rich Network Protocol Support Compatible with DNS, DDNS, NTP, FTP, UPnP, HTTP, SNMP, SIP and other standard protocols, easy to integrate with mainstream ship‑borne NVR & VMS systems.
✅ Robust Marine Environmental Adaptability & Flexible Installation Dimension: 280 × 185 × 223 mm. Operating temperature: ‑40 ℃ ~ +70 ℃, humidity ≤100 %RH (non‑condensing). Special heavy‑duty multi‑angle rotating bracket enables convenient field‑of‑view tuning for various deck installation points without extra adapters.
📋 Key Specification
| Item |
Parameter |
| Model |
MC800‑B |
| Resolution |
4MP (Max 2688×1520) |
| Optical Zoom |
18× motorized zoom, 5.5 mm‑99 mm; F1.78‑F3.73 |
| Built‑in Feature |
Integrated lens wiper, Digital Defog |
| Signal‑to‑Noise Ratio |
>52 dB |
| Video Coding |
H.265, H.264, MJPEG |
| Main‑stream Resolution |
26881520, 25601440, 23041296, 19201080, 1280*720 |
| OSD Information |
Timestamp, PTZ coordinates, zoom value, preset bits, serial OSD |
| Smart Functions |
Motion detection, occlusion detection, audio anomaly detection |
| Special Recording |
SD‑card broken‑network supplementary recording |
| Network Protocols |
DNS, DDNS, NTP, FTP, UPnP, HTTP, SNMP, SIP |
| Certifications |
CCS Type Approval, BS EN62676, CE‑EN60945 |
| Operating Environment |
‑40 ℃ ~ +70 ℃, Humidity ≤100 %RH (non‑condensing) |
| Dimension(L×W×H) |
280 × 185 × 223 mm |
| Installation |
Multi‑angle adjustable integrated bracket |
📦 Lead‑Time & Warranty Terms
| Item |
Details |
| Standard Model |
3‑4‑week production lead‑time upon deposit receipt |
| Custom‑modified Version |
5‑6‑week lead‑time for custom lens parameters, interface or software‑feature adjustments |
Deliverables: Datasheet, mechanical dimension drawings, copies of CCS / CE certificates, operation manual for new‑build / refit project review and ship‑survey submission.
Warranty Terms ‑ 12‑month standard full‑unit warranty. Extended warranty duration negotiable via separate commercial quotation. ‑ Defective hardware supports factory‑return repair or replacement service. ‑ Value‑added support: remote configuration & commissioning guidance, full‑set technical‑document support for ship‑building and vessel‑upgrade projects.
Packaging & Logistics Export‑grade wooden‑crate packaging. Supports EXW, FOB and other international trade terms. Consolidated shipping available with other marine cameras and accessory orders.
⚠️ Reminder: MC800‑B is specialized CCS‑certified long‑zoom marine bullet camera with wiper. Off‑the‑shelf stock cannot be guaranteed. Please place orders sufficiently ahead of project milestones.
📝 Reference Success Stories
Case 1 | New‑Build Offshore Supply Vessel Open‑Deck Long‑Range Surveillance Project
‑Project Challenges: New‑build offshore supply vessel requires CCS‑approved long‑zoom cameras for exposed open‑deck installation. Lens is easily contaminated by sea‑spray and salt deposits; sea‑fog frequently degrades monitoring image; local video backup is required against unstable onboard network; equipment must pass formal CCS ship‑survey. ‑Solution: Deploy MC800‑B marine bullet cameras with wiper, paired with KAIDUNTECH marine wiring accessories. Enable wiper control logic, digital defog function and SD‑card broken‑network recording. Configure OSD information overlay for on‑site reference. ‑Outcome: Built‑in wiper keeps lens clean under salt‑spray environment. 18× optical zoom delivers sharp long‑range 4MP details for deck machinery. Local SD‑card recording avoids footage loss during network fluctuation. Project successfully passed CCS vessel‑survey acceptance.
Case 2 | Coastal Container‑Ship Surveillance Refit Project
‑Project Challenges: In‑service container‑ship refit project. Needs CCS‑compliant long‑zoom cameras for mooring‑area and hull‑side observation. Requires flexible multi‑angle mounting and compatibility with existing ship‑borne VMS platform to meet periodic class‑society inspection requirements. ‑Solution: Install MC800‑B cameras at key deck observation positions. Utilise adjustable bracket to optimise monitoring coverage, activate smart detection alarms for perimeter security. ‑Outcome: Smooth interoperability with legacy ship surveillance infrastructure. Long‑range zoom, wiper cleaning and intelligent alert functions fully satisfy daily vessel security‑management requirements. Refit project completed class‑society acceptance.
❓ FAQ
Q1: What certifications does MC800‑B hold and which application scenarios are suitable? A: MC800‑B holds CCS Type Approval and complies with BS EN62676 and CE‑EN60945 marine standards. It is designed for non‑explosive open‑deck locations on merchant ships, work vessels and offshore auxiliary installations. Full certification documents can be provided for ship‑survey submission.
Q2: What is the core advantage of built‑in wiper? A: The integrated wiper automatically cleans seawater splash, rainwater and salt residue from lens window. It eliminates risky manual maintenance for high‑mounted deck cameras and maintains stable image clarity in salt‑spray open‑deck conditions.
Q3: What performance does 18× optical zoom bring? A: 18× motor‑driven optical zoom (5.5‑99 mm) with maximum 4MP resolution. Operators can zoom‑in to acquire fine details for distant mooring fittings and deck equipment without approaching monitored zones.
Q4: What is the function of SD‑card broken‑network supplementary recording? A: When ship‑borne network connection drops, critical surveillance video will be locally saved on SD‑card to prevent loss of important security recording data.
Q5: Can this camera work under sea‑fog weather? A: Yes, it is equipped with digital defog function, which optimises image clarity and enhances target visibility under sea‑fog and salt‑haze maritime weather.
Q6: What are the environmental working parameters? A: Operating temperature:‑40 ℃ ~ +70 ℃; max relative humidity up to 100 % non‑condensing, adapting to global cold‑sea, temperate and tropical marine operating environments.
Q7: What accessories are recommended? Is customisation supported? A: Recommended accessories: KDR‑1500 Rubber Flexible Hose, KDSR‑1500 Stainless Steel Flexible Hose, KDJ004 Anti‑Corrosion Junction Box, KDP001 Stainless Steel Joint Connector. Customisation for lens parameters, interfaces and software features is supported, with 5‑6‑week production lead‑time upon requirement confirmation.
📎 Optional Accessories List
- KDR‑1500 Rubber Flexible Hose
- KDSR‑1500 Stainless Steel Flexible Hose
- KDJ004 Anti‑Corrosion Junction Box
- KDP001 Stainless Steel Joint Connector