5.8GHz 300Mbps Marine Industrial Wireless AP IP66 316L Housing PoE 200m Range

สถานที่กำเนิด: จีน
ชื่อแบรนด์: KAIDUN
Model Number: KD-WQ01
สอบถามตอนนี้
รับคําอ้างอิง
ข้อมูลจำเพาะ
จุดเด่น

5.8GHz 300Mbps Industrial Wireless AP

,

IP66 316L Industrial Wireless AP

,

PoE 200m Marine Industrial Wireless AP

Effective Transmission Distance:
0‑200 m
WLAN Standard:
IEEE 802.11 a/n (5.8 GHz 2×2 MIMO)
Max Wireless Rate:
300 Mbps
Housing:
316L Stainless‑Steel; Powder‑coated / electro‑polished optional
การป้องกันทางเข้า:
IP66
Operating Temperature:
‑30 ℃ ~ +60 ℃
Dimension(L×W×H):
360 × 334 × 136 mm
Net Weight:
≤6 kg
คําอธิบายสินค้า

KD‑WQ01

Industrial Wireless AP

Industrial‑grade marine wireless access point KD‑WQ01, built around Atheros AR9344 main controller chip, compliant with IEEE 802.11 a/n 5.8 GHz 2×2 MIMO wireless standard. Transmission rate up to 300 Mbps, effective transmission distance up to 200 metres. Equipped with dual 10/100 Mbps Fast‑Ethernet LAN/WAN ports. Supports AP, wireless‑bridge, repeater and router operating modes with seamless AP roaming hand‑off capability. Multiple‑layer wireless encryption security mechanisms are integrated. 316L stainless‑steel IP66 enclosure, wall‑mount design. Dual‑power input: DC 12‑24 VDC and PoE 802.3at. Wide operating temperature ‑30 ℃ ~ +60 ℃. Purpose‑built for ship‑board, offshore platform and heavy‑duty industrial sites, delivering stable high‑speed wireless transmission for marine surveillance cameras and industrial IoT terminal devices.


🎯 Customer Pain Points (Maritime‑Focused)

Marine and industrial wireless networking projects frequently face these real‑world practical challenges:

  1. Difficult cabling for partial ship‑board / offshore locations Some deck zones, mobile equipment and temporary monitoring points cannot deploy network cables. Reliable industrial‑grade wireless links are required for video and data transmission.
  2. Demanding marine environmental conditions Outdoor deck and offshore locations are exposed to salt‑fog, large temperature swings and high humidity. Ordinary commercial wireless AP devices suffer rapid corrosion, overheating and unstable link performance.
  3. High‑bandwidth requirement for marine video surveillance Multiple IP cameras stream high‑definition surveillance video. Low‑rate consumer‑grade wireless equipment causes frame loss, stuttering and video drop‑out. Sufficient wireless throughput is essential.
  4. Diverse networking topology requirements Projects need flexible deployment modes: access‑point coverage, point‑to‑point bridging for long‑distance data relay, repeater signal extension and router mode. Single‑mode devices limit engineering solution design.
  5. Reliable wireless security for ship‑borne local area network Vessel network needs robust wireless encryption to prevent unauthorised access and network intrusion, protecting surveillance video and onboard equipment data.
  6. Roaming requirement for mobile terminals On‑board mobile inspection terminals and wireless cameras need seamless roaming hand‑off between multiple AP nodes without communication interruption.
  7. Flexible power‑supply for marine site deployment Ship‑site power architectures vary. Both DC terminal power and PoE remote power‑feeding shall be supported to simplify on‑site cabling work.
  8. Project‑schedule risk for specialised marine‑grade wireless hardware Industrial marine‑qualified wireless AP belongs to niche maritime network equipment. Ambiguous production lead‑times may delay new‑build and vessel‑refit project milestones.

KD‑WQ01 addresses all above‑mentioned maritime pain‑points: IP66 316L stainless‑steel industrial wireless AP with 5.8 GHz 300 Mbps high‑speed transmission, multi‑mode operation and seamless roaming. Optimised for wireless networking of marine surveillance and IoT devices aboard ships and offshore installations.


🏭 Typical Application Scenarios

✅ Merchant Cargo Vessels: Bulk carriers, container ships, multi‑purpose vessels | Deck wireless coverage, wireless link for partial cable‑free camera positions, mobile‑terminal onboard access ✅ Special‑Purpose Work Vessels: Offshore supply vessels, engineering vessels, maritime patrol crafts | Point‑to‑point wireless bridging between deck zones, relay transmission for monitoring data ✅ Off‑shore Facilities: Off‑shore oil‑gas platforms and auxiliary modules | Industrial wireless network for offshore surveillance and IoT terminals ✅ Coastal On‑shore Sites: Port terminals under salt‑fog atmosphere | Heavy‑duty industrial wireless coverage for harbour monitoring systems

Installation: Wall‑mount deployment. Compatible with KAIDUNTECH marine surveillance camera portfolio, marine‑grade cables and anti‑corrosion accessories to build complete marine wireless surveillance solution.


✨ Core Product Highlights

✅ High‑Performance 5.8 GHz Industrial Wireless Chipset Adopts Atheros AR9344 600 MHz main controller chip, 64 MB RAM + 8 MB Flash. Compliant with IEEE 802.11 a/n standard, 5.8 GHz 2×2 MIMO, maximum wireless rate up to 300 Mbps, transmission distance up to 200 m. Transmit power up to 27 dBm, excellent receiver sensitivity ensures stable link quality for marine video transmission.

✅ Rich Multi‑Mode Networking Capability Supports transparent‑bridge and router‑system architectures: Bridge‑AP / Bridge‑Station / Bridge‑Repeater; Router‑AP / Router‑Station / Router‑Repeater. Realises wireless coverage, point‑to‑point bridging, signal repeater extension and routing functions. Supports AP seamless roaming hand‑off, multi‑SSID configuration (max 3 groups, Chinese‑character SSID supported), DMZ host and NAT port‑mapping.

✅ Comprehensive Wireless‑Security Mechanisms Supports 64/128/152‑bit WEP encryption; WPA‑PSK / WPA2‑PSK / WPA‑EAP / WPA2‑EAP security suites. Implements client isolation, black‑and‑white‑list access control, effectively preventing illegal access and network intrusion for vessel local‑area networks.

✅ Dual‑Fast‑Ethernet Ports & Flexible Power Input Two independent 10/100 Mbps auto‑negotiation LAN/WAN RJ45 ports with auto‑MDI/MD‑X. Dual‑power‑supply design: DC 12‑24 VDC and PoE 802.3at power‑feeding (12‑24 V 1A). Max power consumption ≤18 W, adapting to diversified ship‑site power‑supply schemes.

✅ Web‑Based Centralised Device‑Management Full web‑UI configuration; supports web‑page / Uboot firmware upgrade. Real‑time system monitoring: client‑connection status, signal strength and link rate statistics. Supports hardware‑button or software‑trigger factory reset for convenient on‑site commissioning and maintenance.

✅ 316L Stainless‑Steel IP66 Robust Housing 316L stainless‑steel enclosure, optional powder‑coating or electro‑polished surface finish. IP66 dust‑proof and water‑splash‑proof rating. Wall‑mount structure. Operating temperature ‑30 ℃ ~ +60 ℃, storage temperature ‑40 ℃ ~ +70 ℃, working humidity 5 %‑95 %. Well‑suited for salt‑fog and high‑humidity marine outdoor environments.


📋 Key Specification

Item Parameter
Model KD‑WQ01 Industrial Wireless AP
Main Controller Atheros AR9344, 600 MHz
Memory 64 MB RAM / 8 MB Flash
WLAN Standard IEEE 802.11 a/n (5.8 GHz 2×2 MIMO)
Max Wireless Rate 300 Mbps
Effective Transmission Distance 0‑200 m
Frequency Band 5.180‑5.825 GHz, Channel 36‑165
Transmit Power 27 dBm (500 mW)
Receiver Sensitivity ‑95 dBm
Channel Bandwidth 20 MHz / 40 MHz
Network Ports 2×10/100 Mbps RJ45 LAN/WAN, auto‑negotiation, auto‑MDI/MD‑X
Operation Modes Bridge‑AP / Bridge‑Station / Bridge‑Repeater; Router‑AP / Router‑Station / Router‑Repeater; AP roaming hand‑off
Wireless Security WEP(64/128/152‑bit), WPA‑PSK/WPA2‑PSK, WPA‑EAP/WPA2‑EAP; client isolation, black‑white list
SSID Up to 3 groups, Chinese‑SSID supported
Management Web‑UI config, web / Uboot firmware upgrade, real‑time link monitoring, hardware / software factory reset
Power Supply DC 12‑24 VDC; PoE 802.3at (12‑24 V 1A); Max ≤18 W
Housing 316L Stainless‑Steel; Powder‑coated / electro‑polished optional
Ingress Protection IP66
Operating Temperature ‑30 ℃ ~ +60 ℃
Storage Temperature ‑40 ℃ ~ +70 ℃
Humidity 5 % ~ 95 %
Dimension(L×W×H) 360 × 334 × 136 mm
Net Weight ≤6 kg
Installation Wall‑mount

📦 Lead‑Time & Warranty Terms

Item Details
Standard Model 3‑4‑week production lead‑time upon deposit receipt
Custom‑modified Version 5‑6‑week lead‑time for custom antenna configuration, surface‑treatment, firmware‑feature or interface adjustments

Deliverables: Datasheet, mechanical dimension drawings, operation manual for new‑build / refit marine‑network‑project review submission.

Warranty Terms ‑ 12‑month standard full‑unit warranty. Extended warranty duration negotiable via separate commercial quotation. ‑ Defective hardware supports factory‑return repair or replacement service. ‑ Value‑added support: remote configuration‑guidance, technical‑document support for ship‑building and offshore‑upgrade projects.

Packaging & Logistics Export‑grade wooden‑crate packaging. Supports EXW, FOB and other international trade terms. Consolidated shipping available with marine cameras, cables and junction‑box orders.

⚠️ Reminder: KD‑WQ01 is industrial marine‑grade wireless AP. Actual transmission distance is affected by site obstruction, interference and antenna selection. Off‑the‑shelf stock cannot be guaranteed. Please place orders sufficiently ahead of project milestones.


📝 Reference Success Stories

Case 1 | New‑Build Offshore Supply Vessel Deck Wireless‑Network Project

‑Project Challenges: New‑build offshore supply vessel requires industrial wireless network for several cable‑free deck surveillance cameras. Environment features salt‑fog and wide temperature variation; needs point‑to‑point bridging and local wireless‑coverage, reliable high‑definition‑video‑transmission and secure wireless‑access; equipment must adapt to ship‑board power‑supply and pass marine‑project acceptance. ‑Solution: Deploy KD‑WQ01 industrial wireless AP units. Configure bridge‑station and AP‑coverage modes according to site layout, adopt PoE power‑feeding, enable wireless‑encryption and access‑control policies. Match with marine‑grade anti‑corrosion accessories. ‑Outcome: IP66 316L housing resists deck salt‑fog environment. Stable 5.8 GHz wireless link realises smooth high‑definition video transmission for wireless cameras. Network security‑settings prevent unauthorised access. Project successfully passed vessel‑equipment acceptance.

Case 2 | Coastal Cargo‑Ship Surveillance‑System Refit Wireless‑Upgrade Project

‑Project Challenges: In‑service coastal cargo‑ship refit‑project. Need wireless links for partial deck monitoring positions where cable laying is difficult. Require compatibility with existing ship‑borne VMS and network infrastructure for periodic equipment‑inspection. ‑Solution: Install KD‑WQ01 wireless AP devices at designated wall‑mount positions, complete wireless‑mode commissioning and docking with original onboard network. ‑Outcome: Reliable wireless data transmission fulfils the requirement for cable‑free monitoring‑points. Seamlessly connects with legacy ship‑borne surveillance system. Refit‑project completed equipment‑acceptance.


❓ FAQ

Q1: What are the main application scenarios for KD‑WQ01? A: KD‑WQ01 is 5.8 GHz industrial‑grade wireless AP, mainly used for ship‑board decks, offshore platforms and salt‑fog‑exposed industrial sites. It implements wireless coverage, point‑to‑point bridging and signal‑repeater relay for marine IP‑cameras and industrial IoT terminals.

Q2: Why select 5.8 GHz frequency band for marine deployment? A: The 5.8 GHz band suffers less interference compared with 2.4 GHz in complex ship‑board electromagnetic environments. It is more suitable for high‑definition video‑stream transmission of multiple surveillance cameras.

Q3: What networking modes does KD‑WQ01 support? A: Supports bridge‑mode and router‑mode systems, including AP access‑point, station‑bridging, repeater‑signal‑extension. It also supports multi‑AP seamless roaming hand‑off, multi‑SSID, NAT port‑mapping and DMZ host functions.

Q4: What power‑supply options are available? A: Dual‑power‑input: DC 12‑24 VDC and PoE 802.3at remote power‑feeding, max power consumption ≤18 W, adapting to diversified ship‑board power‑supply architectures.

Q5: What is the actual wireless transmission‑distance? A: The nominal effective distance is up to 200 metres. Actual distance will be affected by on‑site obstructions, electromagnetic‑interference and antenna‑configuration. Conduct site‑survey and link‑test for key‑project deployment.

Q6: What accessories are recommended? Is customisation supported? A: Recommended accessories: matched high‑gain antenna, KDR‑1500 Rubber Flexible Hose, KDSR‑1500 Stainless Steel Flexible Hose, KDJ004 Anti‑Corrosion Junction Box, KDP001 Stainless Steel Joint Connector. Customisation for antenna configuration, surface‑finish, firmware‑functions and interfaces is supported, with 5‑6‑week lead‑time upon requirement confirmation.

Q7: What are environmental‑performance parameters? A: Operating temperature:‑30 ℃ ~ +60 ℃; storage temperature:‑40 ℃ ~ +70 ℃; humidity 5‑95 % non‑condensing; IP66 ingress‑protection, 316L stainless‑steel housing for marine salt‑fog environments.


📦 Optional Accessories List

‑ Matching high‑gain antenna ‑ KDR‑1500 Rubber Flexible Hose ‑ KDSR‑1500 Stainless Steel Flexible Hose ‑ KDJ004 Anti‑Corrosion Junction Box ‑ KDP001 Stainless Steel Joint Connector

ส่งคำถาม